Reference Guide

local-AS Enter the keywords local-AS to view all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED. All routes with
the NO_EXPORT_SUBCONFED (0xFFFFFF03) community attribute must
not be advertised to external BGP peers.
no-advertise Enter the keywords no-advertise to view all routes containing
the well-known community attribute of NO_ADVERTISE. All routes
with the NO_ADVERTISE (0xFFFFFF02) community attribute must not
be advertised to other BGP peers.
no-export Enter the keywords no-export to view all routes containing the
well-known community attribute of NO_EXPORT. All routes with the
NO_EXPORT (0xFFFFFF01) community attribute must not be advertised
outside a BGP confederation boundary.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp ipv6
unicast summary
command. The text line above the route table states the number of
COMMUNITY attributes found.
show ip bgp ipv6 unicast community-list
View routes that are affected by a specific community list.
Z9000
Syntax
show ip bgp ipv6 unicast community-list community-list-name
Paramters
community-list-
name
Enter the name of a configured IP community list.
Command Modes
• EXEC
• EXEC Privilege
773