Reference Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2(0.2) Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 6.3.1.0 Introduced.
default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default information.
Z9000
Syntax
default-information originate [always] [metric metric] [route-
map map-name]
To disable the generation of a default route into the specified IS-IS routing domain, use the no
default-information originate [always] [metric metric] [route-
map
map-name] command.
Parameters
always (OPTIONAL) Enter the keyword always to have the default route
always advertised.
metric metric (OPTIONAL) Enter the keyword metric then a number to assign to
the route. The range is from 0 to 16777215.
route-map map-
name
(OPTIONAL) A default route the routing process generates if the route
map is satisfied.
Defaults Not configured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
794