Reference Guide

redistribute ospf
Redistribute routing information from an OSPF process.
Z9000
Syntax
redistribute ospf process-id [level-1| level-1-2 | level-2]
[match {internal | external}] [metric metric-value] [metric-
type {external | internal}] [route-map map-name]
To return to the default values, use the no redistribute ospf process-id
[level-1| level-1-2 | level-2] [match {internal | external}]
[metric metric-value][metric-type {external | internal}]
[route-map
map-name] command.
Parameters
process-id Enter a number that corresponds to the OSPF process ID to be
redistributed. The range is from 1 to 65355.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric
value that is consistent with the destination protocol. The range is
from 0 to 16777215. The default is 0.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. The two options are:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 2 routes. This setting is the default.
match {external |
internal}
(OPTIONAL) The command used for OSPF to route and redistribute
into other routing domains. The values are
• internal
• external
route-map map-
name
map-name is an identifier for a configured route map. The route map
should filter imported routes from the source routing protocol to the
current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you
specify a keyword, but fail to list route map tags, no routes are
imported.
Defaults Refer to Parameters.
829