Reference Guide

Parameters
minutes Enter the number of minutes of inactivity on the system before
disconnecting the current session. The range is from 0 to 35791. The
default is 10 minutes for the console line and 30 minutes for the VTY
line.
seconds (OPTIONAL) Enter the number of seconds. The range is from 0 to
2147483. The default is 0 seconds.
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
To remove the time interval, enter exec-timeout 0 0.
Example
FTOS con0 is now available
Press RETURN to get started.
FTOS>
exit
Return to the lower command mode.
Z9000
Syntax
exit
Command Modes
• EXEC Privilege
• CONFIGURATION
• LINE, INTERFACE
• TRACE-LIST
• PROTOCOL GVRP
• SPANNING TREE
91