Administrator Guide

NOTE: Starting with Version 9.4(0.0), the loopback IP address advertised to the
neighbor is not displayed in the output because they are not accounted as
inactive OSPF routes, whereas the loopback IP address is displayed until Dell
Networking OS Version 9.3(0.0). Starting with Version 9.4(0.0), the show ip
ospf routes command displays the interface and area ID information of
connected networks in addition to the other settings, whereas these details
are not displayed until Dell Networking OS Version 9.3(0.0). Starting with
Version 9.4(0.0), the metric of E2 routes in the output is displayed as an
external metric, whereas until Dell Networking OS Version 9.3(0.0), the
number of hops to the ASBR for E2 routes are displayed in the output.
Example
Dell#show ip ospf 100 route
Prefix Cost Nexthop Interface Area Type
1.1.1.1 1 0.0.0.0 Lo 0 0 Intra-Area
3.3.3.3 2 13.0.0.3 Gi 0/47 1 Intra-Area
13.0.0.0 1 0.0.0.0 Gi 0/47 0 Intra-Area
150.150.150.0 2 13.0.0.3 Gi 0/47 - External
172.30.1.0 2 13.0.0.3 Gi 0/47 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
Z9000
Syntax
show ip ospf [process-id] statistics global | [interface name
{neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
global Enter the keyword global to display the packet counts
received on all running OSPF interfaces and packet counts
OSPF neighbors receive and transmit.
interface name (OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For Port Channel groups, enter the keywords port-
channel then a number. For the C-Series and S-Series,
the range is from 1 to 128.
• For a SONET interface, enter the keyword sonet then the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
1096
Open Shortest Path First (OSPFv2 and OSPFv3)