Administrator Guide

Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series
E-Series Original command.
Example
Dell#show debug
Generic IP:
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
GigabitEthernet 4/0-3,5-6,10-11,20
GigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
GigabitEthernet 5/0,2,4,6,8,10,12,14,16
Dell#
show inventory
Display the S-Series or Z-Series switch type, components (including media), and Dell Networking
Operating System (OS), including hardware identification numbers and configured protocols.
Z9000
Syntax
show inventory [media slot]
Parameters
media slot (OPTIONAL) Enter the keyword media then the stack ID of
the stack member for which you want to display pluggable
media inventory.
NOTE: This parameter is available but not supported in
Dell Networking Operating System version 8.3.11.4.
Because stacking is not supported, if you use this
parameter, the output displays “Media not present or
accessible” (refer to the Usage Information section).
Defaults none
Command
Modes
CONFIGURATION
Control and Monitoring
131