Administrator Guide

Example (S-
Series)
Dell#show processes ipc flow-control ?
cp Control Processor
| Pipe through a command
show software ifm
Display interface management (IFM) data.
Z9000
Syntax
show software ifm {clients [summary] | ifagt number | ifcb
interface | stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client
information.
summary (OPTIONAL) Enter the keyword summary to display brief
information about IFM clients.
ifagt number Enter the keyword ifagt then the number of an interface
agent to display software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface
IDs then the slot/port information to display interface control
block information for that interface:
• For a Port Channel interface, enter the keyword port-
channel
then a number: The range is from 1 to 128.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
stack-unit unit-
ID
Enter the keyword stack-unit then the stack member
number to display IFM information for that unit. The range is
from 0 to 1.
NOTE: This option is only available on the S-Series.
trace-flags Enter the keyword trace-flags to display IFM information
for internal trace flags.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Control and Monitoring
135