Administrator Guide

ManualsBrandsDell ManualsComputer equipmentForce10 Z9000

1521

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.7.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

pre-Version

6.2.1.1

Introduced on the E-Series.

Commands

max-age — changes the wait time before STP refreshes protocol configuration

information.

hello-time — changes the time interval between BPDUs.

hello-time

Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).

Z-Series

Syntax

hello-time seconds

To return to the default value, use the no hello-time command.

Parameters

seconds Enter a number as the time interval between transmission of

BPDUs. The range is from 1 to 10. The default is 2 seconds.

Defaults 2 seconds

Command

Modes

SPANNING TREE

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.