Administrator Guide

clock update-calendar
Set the switch hardware clock based on the software clock.
Z-Series
Syntax
clock update-calendar
Defaults Not configured.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
Use this command only if you are sure that the hardware clock is inaccurate and
the software clock is correct. You cannot delete this command (there is not a no
form of this command).
Related
Commands
calendar set — sets the hardware clock.
debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
Z-Series
Syntax
debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
To disable debugging of NTP transactions, use the no debug ntp {adjust |
all | authentication | events | loopfilter | packets | select |
sync} command.
Parameters
adjust Enter the keyword adjust to display information on NTP
clock adjustments.
1546
System Time and Date