Administrator Guide

show ip dhcp server
Display the DHCP server statistics.
Z9000
Syntax
show ip dhcp server statistics
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
clear host
Removes one or all dynamically learned host table entries for a specific VRF.
Z9000
Syntax
clear host [vrf vrf-name] {* | host-name}
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the
VRF to delete dynamically learned host table entries
corresponding to that VRF.
host-name Enter the name of the host corresponding to which you
want to delete the dynamically learnt host table entries.
* Enter * to delete all host table entries.
Defaults None
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Dynamic Host Configuration Protocol (DHCP)
527