Administrator Guide

slot0: After entering the keyword slot0:, you can either follow it
with the location of the source file in this form: //
hostlocation/filepath
or press Enter to launch a
prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it
with the location of the source file in this form:
//
hostlocation/filepath or press Enter to launch a
prompt sequence.
flash: After entering the keyword flash:, you can either follow it
with the location of the source file in this form:
flash//
filepath or press Enter to launch a prompt sequence.
A: | B: Enter the partition to upgrade from the flash.
stack-unit: Enter the keywords stack-unit: to synch the image to the
stack-unit.
file-url Enter the following location keywords and information to
upgrade using an Dell Networking OS image other than the
one currently running:
• To specify an Dell Networking OS image on the internal
flash, enter flash:// file-path/filename.
• To specify an Dell Networking OS image on an FTP
server, enter ftp://user:password@hostip/
filepath.
• To specify an Dell Networking OS image on the external
flash on the primary RPM, enter slot0://file-path/
filename.
• To copy a file on a TFTP server, enter tftp://hostip/
filepath/filename
.
where hostip is either an IPv4 dotted decimal address or an
IPv6 URI [x:x:x:x::x] format address.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.0(0.0)
Added support for IPv6 for the file-url parameter.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000. Added support for the SSD on the
Z9000 only.
File Management
77