Reference Guide

Access Control Lists (ACLs) | 107
Figure 6-14. Prefix List
To delete a filter, enter the show config command in the PREFIX LIST mode and locate the sequence
number of the filter you want to delete; then use the
no seq sequence-number command in the PREFIX
LIST mode.
To view all configured prefix lists, use either of the following commands in the EXEC mode:
Figure 6-15. Command example: show ip prefix-list detail
Figure 6-16. Command Example: show ip prefix-list summary
Command Syntax Command Mode Purpose
show ip prefix-list detail [prefix-name]
EXEC Privilege Show detailed information about configured Prefix
lists.
show ip prefix-list summary
[prefix-name]
EXEC Privilege Show a table of summarized information about
configured Prefix lists.
FTOS(conf-nprefixl)#permit 123.23.0.0 /16
FTOS(conf-nprefixl)#deny 133.24.56.0 /8
FTOS(conf-nprefixl)#show conf
!
ip prefix-list awe
seq 5 permit 123.23.0.0/16
seq 10 deny 133.0.0.0/8
FTOS(conf-nprefixl)#
FTOS>show ip prefix detail
Prefix-list with the last deletion/insertion: filter_ospf
ip prefix-list filter_in:
count: 3, range entries: 3, sequences: 5 - 10
seq 5 deny 1.102.0.0/16 le 32 (hit count: 0)
seq 6 deny 2.1.0.0/16 ge 23 (hit count: 0)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 0)
ip prefix-list filter_ospf:
count: 4, range entries: 1, sequences: 5 - 10
seq 5 deny 100.100.1.0/24 (hit count: 0)
seq 6 deny 200.200.1.0/24 (hit count: 0)
seq 7 deny 200.200.2.0/24 (hit count: 0)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 0)
FTOS>
FTOS>show ip prefix summary
Prefix-list with the last deletion/insertion: filter_ospf
ip prefix-list filter_in:
count: 3, range entries: 3, sequences: 5 - 10
ip prefix-list filter_ospf:
count: 4, range entries: 1, sequences: 5 - 10
FTOS>