Reference Guide

24 | About this Guide
www.dell.com | support.dell.com
Conventions
This document uses the following conventions to describe command syntax:
Information Symbols
Table 1-1 describes symbols contained in this guide.
Related Documents
For more information about the Dell Force10 E-Series, C-Series, S-Series and Z-Series refer to the
following documents:
• FTOS Command Reference
• Installing the System
• FTOS Release Notes
Convention Description
keyword Keywords are in bold and should be entered in the CLI as listed.
parameter Parameters are in italics and require a number or word to be entered in the CLI.
{X} Keywords and parameters within braces must be entered in the CLI.
[X] Keywords and parameters within brackets are optional.
x | y Keywords and parameters separated by bar require you to choose one.
Table 1-1. Information Symbols
Symbol Warning Description
ces
Platform Specific
Feature
This symbol informs you of a feature that supported on one or two
platforms only: e is for E-Series, c is for C-Series, s is for S-Series.
e
t
e
x
E-Series Specific
Feature/Command
If a feature or command applies to only one of the E-Series platforms, a
separate symbol calls this to attention: e
t
for the TeraScale or e
x
for
the ExaScale.
S4810 This symbol indicates that the selected feature is supported on the S4810 but not on
other S-Series systems.
*
Exception This symbol is a note associated with some other text on the page that is
marked with an asterisk.