Reference Guide

60 | Management
www.dell.com | support.dell.com
Configure FTP client parameters
To configure FTP client parameters, use the following commands in the CONFIGURATION mode:
To view FTP configuration, use the show running-config ftp Command Output in the EXEC privilege
mode.
Terminal Lines
You can access the system remotely and restrict access to the system by creating user profiles. The terminal
lines on the system provide different means of accessing the system. The console line (console) connects
you through the Console port in the RPMs. The virtual terminal lines (VTY) connect you through Telnet to
the system. The auxiliary line (aux) connects secondary devices such as modems.
Deny and Permit Access to a Terminal Line
Dell Force10 recommends applying only standard ACLs to deny and permit access to VTY lines.
• Layer 3 ACL deny all traffic that is not explicitly permitted, but in the case of VTY lines, an ACL with
no rules does not deny any traffic.
• You cannot use
show ip accounting access-list to display the contents of an ACL that is applied only to
a VTY line.
Command Syntax Command Mode Purpose
ip ftp source-interface interface CONFIGURATION Enter the following keywords and slot/port or number
information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a loopback interface, enter the keyword loopback
followed by a number between 0 and 16383.
• For a port channel interface, enter the keyword
port-channel followed by a number from 1 to 255 for
TeraScale and ExaScale.
• For a SONET interface, enter the keyword sonet
followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a VLAN interface, enter the keyword vlan followed
by a number from 1 to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
ip ftp password password CONFIGURATION Configure a password.
ip ftp username name CONFIGURATION Enter username to use on FTP client.