Reference Guide

Parameters
bgp as number
Enter the keyword bgp then the autonomous system
number.
The range is from 1 to 65535.
connected
Enter the keyword connected to redistribute routes from
physically connected interfaces.
static
Enter the keyword static to redistribute manually
configured routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then the
OSPFv3 link state type of 1 or 2 for default routes. The values
are:
• 1 for a type 1 external route
• 2 for a type 2 external route
The default is 2.
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of an established route map. If the route map is not
configured, the default is
deny (to drop all routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Defaults Not configured.
Command
Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1134
Open Shortest Path First (OSPFv2 and OSPFv3)