Reference Guide

ipv6 pim spt-threshold
Specifies when a PIM leaf router should join the shortest path tree.
Syntax
ipv6 pim spt-threshold {kbps | infinity}
To return to the default value, use the no ipv6 pim spt-threshold command.
Parameters
kbps Enter a traffic rate in kilobytes per second. The range is from
0 to 4294967 kbps. The default is 10 kbps.
infinity Enter the keyword infinity to have all sources for the
specified group use the shared tree and never join shortest
path tree (SPT).
Defaults 10 kbps
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 7.4.1.0 Introduced
Usage
Information
PIM leaf routers join the shortest path tree immediately after the first packet arrives
from a new source.
show ipv6 pim bsr-router
View information on the bootstrap router (v2).
Syntax
show ipv6 pim bsr-router
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
PIM-Sparse Mode (PIM-SM)
1191