Reference Guide

[11/20 15:47:23]: CMD-(CLI):[protocol spanning-tree pvst]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no disable]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/1]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 1.1.1.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[ip access-group abc in]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/2]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/3]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 5.5.5.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/4]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/5]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 21:17:35]: CMD-(CLI):[line console 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exec-timeout 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exit]by default from console
[11/20 21:19:25]: CMD-(CLI):[show command-history]by default
from console
Dell#
show command-tree
Display the entire CLI command tree, and optionally, display the utilization count for each command and
its options.
Z9000
Syntax
show command-tree [count | no]
Parameters
count Display the command tree with a usage counter for each
command.
no Display all of the commands that may be preceded by the
keyword no, which is the keyword used to remove a
command from the running-configuration.
126
Control and Monitoring