Reference Guide

Field Description
Status (Allowed
ports)
Indicates if the input policy map configuration on an
interface belonging to a stack-unit/port-pipe is successful
— Allowed (n) — or not successful — Exception. The
allowed number (n) indicates the number of ports in that
port-pipe on which the Policy Map can be applied
successfully.
NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the
output contains only L2ACL CAM partition entries.
Example
Dell# test cam-usage service-policy input pmap_l2 stack-unit
all
For a L2 Input Policy Map pmap_l2, the output must be as
follows,
stack-unit|Portpipe|CAM Partition|Available CAM|Estimated CAM|
Status
| | | |per Port |
(Allowed ports)
0 0 L2ACL 500 200
Allowed (2)
0 1 L2ACL 100 200
Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200
Allowed (2)
Dell#
show qos policy-map-output
View the output QoS policy map details.
Z9000
Syntax
show qos policy-map-output [policy-map-name] [qos-policy-output
qos-policy-name]
Parameters
policy-map-
name
Enter the policy map name.
qos-policy-
output qos-
policy-name
Enter the keyword qos-policy-output then the QoS
policy name.
Defaults none
Quality of Service (QoS)
1267