Reference Guide

APF12300017GEY Yes
0 9 QSFP 40GBASE-CR4-1M
APF12300017GEY Yes
0 10 QSFP 40GBASE-CR4-1M
APF12300017GEY Yes
Related
Commands
• show interfaces — displays the interface configuration.
• show interfaces transceiver — displays the physical status and operational status
of an installed transceiver. The output also displays the transceiver’s serial
number.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Z9000
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control
processor’s SWPQ statistics.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series and E-Series.
132
Control and Monitoring