Reference Guide

Parameters
system Enter the keyword system to send accounting information
of any other AAA configuration.
exec Enter the keyword exec to send accounting information
when a user has logged in to EXEC mode.
commands
level
Enter the keyword command then a privilege level for
accounting of commands executed at that privilege level.
name | default Enter one of the following:
• For name, enter a user-defined name of a list of
accounting methods.
• For default, the default accounting methods used.
start-stop Enter the keywords start-stop to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords wait-start to ensure that the TACACS
+ security server acknowledges the start notice before
granting the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+
security server to send a “stop record accounting” notice at
the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for
accounting. Dell Networking OS currently only supports
TACACS+ accounting.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
1344
Security