Reference Guide

To return to the default setting, use the no aaa authentication login
{method-list-name | default} command.
Parameters
method-list-
name
Enter a text string (up to 16 characters long) as the name of a
user-configured method list that can be applied to different
lines.
default Enter the keyword default to specify that the method list
specified is the default method for all terminal lines.
method Enter one of the following methods:
• enable: use the password the enable password
command defines in CONFIGURATION mode.
• line: use the password the password command defines
in LINE mode.
• none: no authentication.
• radius: use the RADIUS servers configured with the
radius-server host command.
• tacacs+: use the TACACS+ servers configured with the
tacacs-server host command.
... method4 (OPTIONAL) Enter up to four additional methods. In the
event of a “no response” from the first method, Dell
Networking OS applies the next configured method (up to
four configured methods).
Defaults Not configured (that is, no authentication is performed).
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Security
1357