Reference Guide

Related
Commands
ntp authentication-key — sets an authentication key for NTP.
ntp authenticate — enables the NTP authentication parameters you set.
ntp update-calendar
Configure the Dell Networking OS to update the calendar (the hardware clock) with the NTP-derived
time.
Z-Series
Syntax
ntp update-calendar [minutes]
To return to default setting, use the no ntp update-calendar command.
Parameters
minutes (OPTIONAL) Enter the number of minutes between updates
from NTP to the hardware clock. The range is from 1 to
1440. The default is
60 minutes.
Defaults Not enabled.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
1558
System Time and Date