Reference Guide

show vlt statistics
Displays statistics on VLT operations.
Z9000
Syntax
show vlt statistics [arp | domain | igmp-snoop | mac |
multicast | ndp]
Parameters
domain Display the VLT statistics for the domain.
multicast Display the VLT statistics for multicast.
mac Display the VLT statistics for the MAC address.
arp Display the VLT statistics for ARP.
igmp-snoop Display the VLT statistics for IGMP snooping.
ndp Display the VLT statistics for NDP.
Default Not configured.
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2) Added parameters multicast and ndp
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Added support in the output for ARP, MAC, and IGMP
snooping.
Version 8.3.8.0 Introduced on the S4810.
Related
Commands
clear vlt statistics — clears the statistics on VLT operations.
Example
NOTE: The following example shows the statistics for all of the VLT
parameters. If you enter a specific keyword, such as mac, only the statistics for
that VLT parameter displays.
Dell_VLTpeer1#show vlt statistics
VLT Statistics
----------------
HeartBeat Messages Sent: 930
HeartBeat Messages Received: 909
ICL Hello's Sent: 927
1602
Virtual Link Trunking (VLT)