Reference Guide

Version 8.3.1.0 Add the DSCP value for ACL matching.
Version 8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3)
ACLs.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added support for the non-contiguous mask and added the
monitor option.
Version 6.5.10 Expanded to include the optional QoS order priority for the
ACL entry.
Usage
Information
The order option is relevant in the context of the Policy QoS feature only. For
more information, refer to the “Quality of Service” chapter of the
Dell Networking
OS Configuration Guide.
Related
Commands
deny — Assigns a IP ACL filter to deny IP packets.
ip access-list standard — creates a standard ACL.
resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
Z9000
Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-
to-Increment}
Parameters
ipv4 | ipv6 |
mac
Enter the keyword ipv4or mac to identify the access list type
to resequence.
access-list-
name
Enter the name of a configured IP access list.
StartingSeqNu
m
Enter the starting sequence number to resequence. The
range is from 0 to 4294967290.
Step-to-
Increment
Enter the step to increment the sequence number. The
range is from 1 to 4294967290.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Access Control Lists (ACL)
185