Reference Guide

The linkStatus of Front End Port 20 is FALSE
The linkStatus of Front End Port 21 is FALSE
The linkStatus of Front End Port 22 is FALSE
The linkStatus of Front End Port 23 is TRUE
The linkStatus of Hg Port 24 is TRUE
The linkStatus of Hg Port 25 is TRUE
The linkStatus of Hg Port 26 is FALSE
The linkStatus of Hg Port 27 is FALSE
!------------------ output truncated ---------------!
Example
(Total-Buffer)
Dell(conf)#show hardware stack-unit 0 buffer total-buffer
Dell#sh hardware stack-unit 0 buffer total-buffer
----- Buffer Details for Stack-Unit 0 -----
Total Buffers allocated per Stack-Unit 46080
Example
(Buffer-Info)
Dell(conf)#sh hardware stack-unit 0 buffer unit 0 port 1
buffer-info
----- Buffer Stats for Unit 0 Port 1 -----
Maximum Shared Limit for the Port: 30720
Default Packet Buffer allocate for the Port: 120
Used Packet Buffer for the Port: 0
Example
(Queue2/
Buffer-Info)
Dell(conf)#sh hardware stack-unit 0 buffer unit 0 port 1 queue
2 buffer-info
----- Buffer Stats for Unit 0 Port 1 Queue 2 -----
Maximum Shared Limit: 30720
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show interfaces stack-unit — displays information on all interfaces on a specific S-
Series stack member.
show system (S-Series and Z-Series) — displays the current status of all the stack
members or a specific member.
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Z9000
Syntax
show hardware system-flow layer2 stack-unit id port-set number
[counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe,
display which system flow entry the packet hits and what
queue the packet takes as it dumps the raw system flow
tables.
512
Debugging and Diagnostics