Reference Guide

nsap Enter a specific NSAP address that is associated with the
name parameter.
Defaults Not configured.
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Usage
Information
To configure a shortcut name that you can use instead of entering a long string of
numbers associated with an NSAP address, use this command.
Related
Commands
hostname dynamic — enables dynamic learning of host names from routers in the
domain and allows the routers to advertise the host names in LSPs.
debug isis
Enable debugging for all IS-IS operations.
Z9000
Syntax
debug isis
To disable debugging of IS-IS, use the no debug isis command.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant FTOS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
836
Intermediate System to Intermediate System (IS-IS)