Reference Guide

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2) Introduced on the Z9000.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 6.3.1.0 Introduced.
default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default
information.
Z9000
Syntax
default-information originate [always] [metric metric] [route-
map map-name]
To disable the generation of a default route into the specified IS-IS routing domain,
use the no default-information originate [always] [metric metric]
[route-map
map-name] command.
Parameters
always (OPTIONAL) Enter the keyword always to have the default
route always advertised.
metric metric (OPTIONAL) Enter the keyword metric then a number to
assign to the route. The range is from 0 to 16777215.
Intermediate System to Intermediate System (IS-IS)
841