Reference Guide

Version

8.3.12.0

Introduced on the S4810.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.1.1.0 Introduced on the E-Series ExaScale.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

E-Series Original command

Usage

Information

After entering the banner login command, type one or more spaces and a

delineator character. Enter the banner text then the second delineator character.

When the user is connected to the router, if a message of the day banner is

configured, it displays first. If no message of the day banner is configured, the login

banner and prompt appear. After the user has logged in, the EXEC banner (if

configured) displays.

Commands

banner exec — enables the display of a text string when you enter EXEC mode.

banner login — sets a banner to display after successful login to the system.

cam-acl

Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.

Z9000

Syntax

cam-acl {default | l2acl number ipv4acl number ipv6acl number

ipv4qos number l2qos number l2pt number ipmacacl number [vman-

qos | vman-dual-qos] number ecfmacl number {openflow {4|8}}

Parameters

default Use the default CAM profile settings and set the CAM as

follows:

• L3 ACL (ipv4acl): 4

• L2 ACL(l2acl): 6

• IPv6 L3 ACL (ipv6acl): 0

• L3 QoS (ipv4qos): 2

• L2 QoS (l2qos): 1

• OpenFlow: 0 (disabled)

• FCoE (fcoeacl): 0 (disabled)

• iSCSI Optimization (iscsioptacl): 0 (disabled)

Control and Monitoring