Reference Guide

Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
Optionally, use the banner exec command to create a text string that is displayed
when you access EXEC mode. This command toggles that display.
Related
Commands
line — enables and configures console and virtual terminal lines to the system.
exec-timeout
Set a time interval that the system waits for input on a line before disconnecting the session.
Z9000
Syntax
exec-timeout minutes [seconds]
To return to default settings, use the no exec-timeout command.
Parameters
minutes Enter the number of minutes of inactivity on the system
before disconnecting the current session. The range is from
0 to 35791. The default is 10 minutes for the console line
and 30 minutes for the VTY line.
seconds (OPTIONAL) Enter the number of seconds. The range is from
0 to 2147483. The default is 0 seconds.
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Control and Monitoring
99