Addendum

Usage
Information
You can configure the amount of time for which the device must wait before it
attempts to establish a TCP connection. Using this capability, you can limit the wait
times for TCP connection requests. Upon responding to the initial SYN packet that
requests a connection to the router for a specific service (such as SSH or BGP) with
a SYN ACK, the router waits for a period of time for the ACK packet to be sent from
the requesting host that will establish the TCP connection.
show ip tcp initial-time
Displays the interval that you configured for the device to wait before the TCP connection is attempted to
be established. This command is supported on the S4810, S4820T, S6000, Z9000, I/O Aggregator, and
MXL platforms.
Syntax
show ip tcp initial-time
Command
Modes
EXEC
EXEC Privilege
Command
History
Version 9.3.0.0 Introduced on the S4810, S4820T, S6000, Z9000, I/O
Aggregator, and MXL platforms.
IPv4 Routing
155