Addendum

Field Description
Interface Slot and port number, and the type of the member
interface of the port channel
Line Protocol Indicates whether the interface is administratively
up or down
Utilization (In Percent) Traffic usage in percentage of the packets
processed by the particular member interface
You can also use the
show running-configuration interface port-channel command in EXEC
Privilege mode to view whether the mechanism to evaluate the utilization of the member interfaces of
the LAG bundle is enabled. The following sample output illustrates the portion of this show command:
Dell#show running-config int port-channel
!
interface Port-channel 1
mtu 12000
portmode hybrid
switchport
vlt-peer-lag port-channel 1
no shutdown
link-bundle-monitor enable
show link-bundle-distribution port-channel
Display the traffic-handling and utilization of the member interfaces of the port channel.
Syntax
show link-bundle-distribution port-channel interface-number
Parameters
interface-
number
For a Port Channel interface, enter the keyword port-
channel followed by a number:
Range: 1-128
Command
Modes
EXEC
EXEC Privilege
Command
History
Version 9.3.0.0 Introduced on the M I/O Aggregator
Usage
Information
The following table describes the output fields of this show command:
Field Description
Link-bundle trigger threshold Threshold value that is the checkpoint,
exceeding which the link bundle is
marked as being overutilized and alarm
is generated
LAG bundle number Number of the LAG bundle
Utilization (In Percent) Traffic usage in percentage of the
packets processed by the port channel
160
Link Aggregation Groups (LAGs)