Addendum

Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show interfaces stack-unit — displays information on all interfaces on a specific S-
Series stack member.
show processes cpu (S-Series) — displays the CPU usage information based on the
processes running in an S-Series.
show system (S-Series and Z-Series) — displays the current status of all the stack
members or a specific member.
clear hardware stack-unit (for high-Gigabit Ethernet
ports)
Clear statistics from selected hardware components.
NOTE: Only the parameters that are newly introduced with this command in Release 9.3(0.0) are
explained here. For a complete description of all of the options that are available with this
command, refer the relevant
Command Reference Guide of the applicable platform of Release
9.2(0.0).
Z9000
Syntax
clear hardware stack-unit number {counters | unit number
counters | hg-stats [unit number [port port-number]] | cpu
data-plane statistics | cpu i2c statistics | stack-port number}
Parameters
hg-stats [unit
unit-number
[port port-
number | no]]
Enter the keyword hg-stats to display high–Gigabit
Ethernet or backplane port buffer and queue statistics on the
selected stack member. Optionally, use the keyword
unit
with a number to select port-pipe 0 to 5, and then use port
port-number to select a port on that port-pipe.
For Z9000, valid backplane ports for leaf NPU units (units 0–
3) range from 34-41 and for spine NPU units (units 4–5)
range from 1 -16.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.3.0.0 Added support for the hg-stats option on the Z9000
platform.
Related
Commands
show hardware stack-unit — displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
Link Aggregation Groups (LAGs)
169