Addendum

Defaults Not configured (that is, no authentication is performed).
Command
Modes
CONFIGURATION
Command
History
Version 9.3.0.0 Introduced on the M I/O Aggregator.
Usage
Information
By default, the locally configured username password is used. If you configure aaa
authentication login default
, FTOS uses the methods this command
defines for login instead.
Methods configured with the aaa authentication login command are
evaluated in the order they are configured. If users encounter an error with the first
method listed, FTOS applies the next method configured. If users fail the first
method listed, no other methods are applied. The only exception is the local
method. If the user’s name is not listed in the local database, the next method is
applied. If the correct user name/password combination is not entered, the user is
not allowed access to the switch.
NOTE: If authentication fails using the primary method, FTOS employs the
second method (or third method, if necessary) automatically. For example, if
the TACACS+ server is reachable, but the server key is invalid, FTOS proceeds
to the next authentication method. The TACACS+ is incorrect, but the user is
still authenticated by the secondary method.
After configuring the aaa authentication login command, configure the
login authentication command to enable the authentication scheme on
terminal lines.
Connections to the SSH server work with the following login mechanisms: local,
radius, and tacacs.
Related
Commands
login authentication — enables AAA login authentication on the terminal lines.
password — creates a password.
radius-server host — specifies a RADIUS server host.
tacacs-server host — specifies a TACACS+ server host.
access-class
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-
name
Enter the name of an established IP Standard ACL.
Defaults Not configured.
Command
Modes
LINE
Security for M I/O Aggregator
217