Addendum

Usage
Information
To define a password for the level to which you are assigning privilege or access,
use the enable password command.
privilege level (LINE mode)
Change the access level for users on the terminal lines.
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level
command.
Parameters
level level
Enter the keyword level then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes.
Defaults level = 15
Command
Modes
LINE
Command
History
Version 9.3.0.0 Introduced on the M I/O Aggregator
RADIUS Commands
The following RADIUS commands are supported by FTOS.
radius-server deadtime
Configure a time interval during which non-responsive RADIUS servers to authentication requests are
skipped.
Syntax
radius-server deadtime seconds
To disable this function or return to the default value, use the no radius-server
deadtime command.
Parameters
seconds Enter a number of seconds during which non-responsive
RADIUS servers are skipped. The range is from 0 to
2147483647 seconds. The default is 0 seconds.
Defaults 0 seconds
Command
Modes
CONFIGURATION
Command
History
Version 9.3.0.0 Introduced on the M I/O Aggregator.
Security for M I/O Aggregator
227