Addendum

Command
History
Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed
and disables the scheduling of that class. If the sum of the bandwidth percentages
given to all eight classes exceeds 100%, the bandwidth percentage automatically
scales down to 100%.
Related
Commands
qos-policy-output — creates a QoS output policy.
clear qos statistics
Clears Matched Packets, Matched Bytes, and Dropped Packets.
Syntax
clear qos statistics interface-name
Parameters
interface-name Enter one of the following keywords:
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
When you issue this command, statistical information stored regarding QoS clears
and resets to 0. You can access these statistics using the show qos statistics
command in EXEC mode. When the traffic pattern matches the QoS classification
criteria flows, the corresponding counters increment.
Related
Commands
show qos statistics — displays the QoS statistics.
394
Quality of Service (QoS)