Addendum

To remove a DCB map from an interface, enter the no dcb-map map-name
command in Interface configuration mode.
Related
Commands
show qos dcb-map– displays the dcb-map profiles configured on the system.
dcb-map stack-unit all stack-ports all– applies a DCB map on all ports of a switch
stack.
description (for FCoE maps)
In an FCoE map, add a text description of the FCoE and FC parameters used to transmit storage traffic
over an M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module NPIV proxy gateway in a
converged fabric.
M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module
Syntax
description text
Parameters
text Enter a maximum of 32 characters.
Defaults None
Command
Modes
FCOE MAP
Command
History
Version 9.3.0.0 Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
Usage
Information
The text description is displayed in show fcoe-map command output.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
fabric
Apply an FCoE map on a fabric-facing Fibre Channel (FC) port.
M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module
Syntax
fabric map-name
Parameters
map-name Maximum: 32 alphanumeric characters.
Defaults None
572
NPIV Proxy Gateway for FC Flex IO Modules