Command Line Reference Guide

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate
command.
Despite removing an OSPF process globally, the OSPF process is not completely
removed from the BGP configuration.
Related
Commands
default-information originate — generates a default route into the OSPF routing
domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
Z9000
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name]
[tag
tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1
to 65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric then the metric-
value number. The range is from 0 to16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
Open Shortest Path First (OSPFv2 and OSPFv3)
1063