Command Line Reference Guide

5 c5 -
6 c6 q6
7 c7 q7
Dell#
Example
(Summary IPv4)
Dell#sho qos policy-map summary
Interface policy-map-input policy-map-output
Gi 4/1 PM1 -
Gi 4/2 PM2 PMOut
Dell#
show qos policy-map-input
View the input QoS policy map details.
Z9000
Syntax
show qos policy-map-input [policy-map-name] [class class-map-
name] [qos-policy-input qos-policy-name]
Parameters
policy-map-
name
Enter the policy map name.
class class-
map-name
Enter the keyword class then the class map name.
qos-policy-
input qos-
policy-name
Enter the keyword qos-policy-input then the QoS policy
name.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 E-Series Only: Added Trust IPv6 diffserv.
Quality of Service (QoS)
1253