Command Line Reference Guide

show command-tree
Display the entire CLI command tree, and optionally, display the utilization count for each command and
its options.
Z9000
Syntax
show command-tree [count | no]
Parameters
count Display the command tree with a usage counter for each
command.
no Display all of the commands that may be preceded by the
keyword no, which is the keyword used to remove a
command from the running-configuration.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced.
Usage
Information
Reload the system to reset the command-tree counters.
Example
Dell#show command-tree count
!
Enable privilege mode:
enable command usage:3
<0-15> option usage: 0
exit command usage:1
show command-tree command usage:9
count option usage: 3
show version command usage:1
128
Control and Monitoring