Command Line Reference Guide
traceroute
View a packet’s path to a specific device.
Z9000
Syntax
traceroute {host | ip-address | ipv6-address}
Parameters
host Enter the name of device.
ip-address Enter the IP address of the device in dotted decimal format.
ipv6-address Enter the IPv6 address, in the x:x:x:x::x format, to which you
are testing connectivity.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults
• Timeout = 5 seconds
• Probe count = 3
• 30 hops max
• 40 byte packet size
• UDP port = 33434
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the E-Series ExaScale with IPv6.
Version 8.1.1.0 Introduced on the E-Series ExaScale (IPv4 only).
Version 7.9.1.0 Introduced VRF.
Version 7.6.1.0 Added support for the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Control and Monitoring
147