Command Line Reference Guide

Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
In the switch, the hardware clock is separate from the software and is called the
calendar. This hardware clock runs continuously. After the hardware clock (the
calendar) is set, the Dell Networking OS automatically updates the software clock
after system bootup.
You cannot delete this command (there is not a no version of this command).
clock set
Set the software clock in the switch.
Z-Series
Syntax
clock set time month day year
Parameters
time Enter the time in hours:minutes:seconds. For the hour
variable, use the 24-hour format; example, 17:15:00 is 5:15
pm.
month Enter the name of one of the 12 months, in English. You can
enter the number of a day and change the order of the
display to time day month year.
day Enter the number of the day. The range is from 1 to 31. You
can enter the name of a month to change the order of the
display to time month day year.
year Enter a four-digit number as the year. The range is from 1993
to 2035.
Defaults Not configured.
Command
Modes
EXEC Privilege
System Time and Date
1543