Command Line Reference Guide

description
Enter a description of the IS-IS routing protocol.
Z9000
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the IS-IS protocol (80
characters maximum).
Defaults none
Command
Modes
ROUTER ISIS
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
pre-7.7.1.0 Introduced.
Related
Commands
router isis — Enter ROUTER mode on the switch.
distance
Define the administrative distance for learned routes.
Z9000
Syntax
distance weight [ip-address mask [prefix-list]]
To return to the default values, use the no distance weight command.
Parameters
weight The administrative distance value indicates the reliability of a
routing information source. The range is from 1 to 255. (A
higher relative value indicates lower reliability. Routes with
smaller values are given preference.) The default is 115.
838
Intermediate System to Intermediate System (IS-IS)