Installation Manual
Table Of Contents
- Preface
- The Z9000 System
- Site Preparations
- Install the Z9000
- Power Supplies
- Fans
- Access Ports
- Specifications
- Chassis Physical Design
- Agency Compliance
- USA Federal Communications Commission (FCC) Statement
- Canadian Department of Communication Statement
- European Union EMC Directive Conformance Statement
- Japan: VCCI Compliance for Class A Equipment
- Korean Certification of Compliance
- Safety Standards and Compliance Agency Certifications
- Electromagnetic Compatibility (EMC)
- Product Recycling and Disposal
- Battery Replacement
- For California:
- Technical Support
![](/manual/dell/force10-z9000/installation-manual-english/images/img-8.png)
14 | The Z9000 System
www.dell.com | support.dell.com
Table 2-4. Port LED Displays
Feature
Description
QSFP+ Port LED Link LED:
• Green—Link up on this port
When the QSFP+ ports are operating in 40G mode, the left-most LED is lit.
When the ports are operating in 4x10G mode, only the LEDs associated with an active
port are lit.
• Blinking Green—Activity, transmitting, or receiving packet at this port
• Off—No link
Management (Ethernet) Port
LEDs
Link LED (right side of the port):
• Green—Link up at 1G speed
• Amber—Link up at 100M or 10M speed
• Off—No link
Activity LED (left side of the port):
• Blinking Green—Activity, transmitting, or receiving packet at this port
• Off—No traffic