Installation Manual
Table Of Contents
- Preface
- The Z9000 System
- Site Preparations
- Install the Z9000
- Power Supplies
- Fans
- Access Ports
- Specifications
- Chassis Physical Design
- Agency Compliance
- USA Federal Communications Commission (FCC) Statement
- Canadian Department of Communication Statement
- European Union EMC Directive Conformance Statement
- Japan: VCCI Compliance for Class A Equipment
- Korean Certification of Compliance
- Safety Standards and Compliance Agency Certifications
- Electromagnetic Compatibility (EMC)
- Product Recycling and Disposal
- Battery Replacement
- For California:
- Technical Support
Specifications | 41
8
Specifications
This chapter contains the following sections:
• Chassis Physical Design
• Agency Compliance
Chassis Physical Design
Environmental Parameters
AC Power Requirements
Parameter Specifications
Height 3.48 inches (8.8 cm)
Width 17.32 inches (44.0 cm)
Depth 24.00 inches (61.00 cm)
Chassis weight 50.3 lbs (approx.) (22.8 kg)
Rack clearance required Front: 5-inches (12.7 cm)
Rear: 5-inches (12.7 cm)
Thermal dissipation 2692 BTU/h (789 W)
Parameter Specifications
Temperature 32° to 104°F (0° to 40°C)
-40° to 158°F (-20° to 70°C)
Maximum altitude No performance degradation to 10,000 feet (3,048 meters)
Relative humidity 10 to 85% non-condensing
Parameter Specifications
Nominal input voltage 100 to 240 VAC, 50/60 Hz
Maximum AC power supply input current 8.00 A @ 100/120VAC
4.00 A @ 200/240 VAC
Maximum system power input 789 W