Specifications

30 | Fans
www.dell.com | support.dell.com
Figure 6-1. Removing the fan module screen
Figure 6-2. Replacing the fan module
To install a new fan module, follow the steps below:
Replace a fan module
To replace a fan module, follow the steps below.
Step Task
1 Twist the latching screws so that the fan screen detaches from the chassis.
2 Remove the screen, and set aside.
3 Take the fan module out of the shipping box.
4 Using the grab handle, slide the module in to the bay.
5 Tighten the securing screw on the side of the module.
6 Replace the fan screen.
7 Twist the latches to the screen is securely attached.
Step Task
1 Twist the latching screws so that the fan screen detaches from the chassis.
2 Remove the screen, and set aside.
Fan screen
PSU1
PSU0
Fan modules
Latching
screw
Latching
screw
PSU1
PSU0
Fan Module 0
Fan Module 1
Fan Module 2
Fan Module 3
Screw
Grab Handle