Command Line Reference Guide

show command-tree
Display the entire CLI command tree, and optionally, display the utilization count for each command and
its options.
Syntax
show command-tree [count | no]
Parameters
count Display the command tree with a usage counter for each
command.
no Display all of the commands that may be preceded by the
keyword no, which is the keyword used to remove a
command from the running-configuration.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Reload the system to reset the command-tree counters.
Example
Dell#show command-tree count
!
Enable privilege mode:
calendar command usage:5
set option usage: 0
hh:mm:ss option usage: 0
<1-31> option usage: 0
<MONTH> option usage: 0
<1993-2035> option usage: 0
<MONTH> option usage: 0
<1-31> option usage: 0
<1993-2035> option usage: 0
clear arp-cache command usage:2
clear ip dhcp command usage:1
binding option usage: 0
A.B.C.D option usage: 0
client option usage: 0
statistics option usage: 0
interface option usage: 0
fastethernet option usage: 0
SLOT/PORT option usage: 0
fortyGigE option usage: 0
SLOT/PORT option usage: 0
SLOT/PORT option usage: 0
managementethernet option usage: 0
SLOT/PORT option usage: 0
port-channel option usage: 0
<1-128> option usage: 0
tengigabitethernet option usage: 0
SLOT/PORT option usage: 0
vlan option usage: 0
<1-4094> option usage: 0
102
Control and Monitoring