Command Line Reference Guide

Related
Commands
private-vlan mode — sets the mode of the selected VLAN to community, isolated,
or primary.
show vlan private-vlan — displays the PVLANs and/or interfaces that are part of a
PVLAN.
show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.
switchport mode private-vlan — sets PVLAN mode of the selected port.
show vlan private-vlan
Display PVLANs and/or interfaces that are part of a PVLAN.
Syntax
show vlan private-vlan [community | interface | isolated |
primary | primary_vlan | interface interface]
Parameters
community (OPTIONAL) Enter the keyword community to display VLANs
configured as community VLANs, along with their interfaces.
interface (OPTIONAL) Enter the keyword interface to display VLANs
configured as community VLANs, along with their interfaces.
isolated (OPTIONAL) Enter the keyword isolated to display VLANs
configured as isolated VLANs, along with their interfaces.
primary (OPTIONAL) Enter the keyword primary to display VLANs
configured as primary VLANs, along with their interfaces.
primary_vlan (OPTIONAL) Enter a private VLAN ID or secondary VLAN ID
to display interface details about the designated PVLAN.
interface
interface
(OPTIONAL) Enter the keyword interface and an interface
ID to display the PVLAN configuration of the designated
interface.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Examples of all types of command output are shown below. The first type of
output is the result of not entering an optional keyword. It displays a detailed list of
all PVLANs and their member VLANs and interfaces. The other types of output
show details about PVLAN subsets.
Private VLAN (PVLAN)
1055