Command Line Reference Guide

Command
History
Version 8.3.16.1 Introduced on THE MXL 10/40GbE Switch IO Module.
Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
wred_teng_y 4096 8192
wred_teng_g 8192 16384
WRED1 2000 7000
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number | [all]}
Parameters
policy-map Enter the policy map name.
stack-unit
number
(OPTIONAL) Enter the keywords stack-unit then the
stack-unit number.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all all to
indicate all the stack-units.
Defaults none
Command
Modes
EXEC
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This feature allows you to determine if the CAM has enough space available before
applying the configuration on an interface.
An input policy map with both Trust and Class-map configuration, the Class-map
rules are ignored and only the Trust rule is programmed in the CAM. In such an
instance, the Estimated CAM output column contains the size of the CAM space
required for the Trust rule and not the Class-map rule.
The following describes the text cam-usage service-policy input
policy-map linecard
command shown in the following example.
Field Description
stack-unit Indicates the line card slot number.
Portpipe Indicates the portpipe number.
1102
Quality of Service (QoS)