Command Line Reference Guide

To remove a specified RMON history group of statistics collection, use the no
rmon collection history {controlEntry integer} command.
Parameters
controlEntry
integer
Enter the keyword controlEntry to specify the RMON
group of statistics using a value. Then enter an integer value
from 1 to 65535 that identifies the RMON group of statistics.
The integer value must be a unique index in the RMON
history table.
owner name (OPTIONAL) Enter the keyword owner then the owner name
to record the owner of the RMON group of statistics.
buckets
number
(OPTIONAL) Enter the keyword buckets then the number of
buckets for the RMON collection history group of statistics.
The bucket range is from 1 to 1000. The default is 50.
interval
seconds
(OPTIONAL) Enter the keyword interval then the number
of seconds in each polling cycle. The range is from 5 to 3600
seconds. The default is 1800 seconds.
Defaults none
Command
Modes
CONFIGURATION INTERFACE (config-if)
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
rmon collection statistics
Enable RMON MIB statistics collection on an interface.
Syntax
rmon collection statistics {controlEntry integer} [owner name]
To remove RMON MIB statistics collection on an interface, use the no rmon
collection statistics {controlEntry
integer} command.
Parameters
controlEntry
integer
Enter the keyword controlEntry to specify the RMON
group of statistics using a value. Then enter an integer value
from 1 to 65535 that identifies the RMON Statistic Table. The
integer value must be a unique in the RMON statistic table.
owner name (OPTIONAL) Enter the keyword owner then the owner name
to record the owner of the RMON group of statistics.
Defaults none
Command
Modes
CONFIGURATION INTERFACE (config-if)
1132
Remote Monitoring (RMON)