Command Line Reference Guide

46
Rapid Spanning Tree Protocol (RSTP)
The Dell Networking Operating System (OS) implementation of rapid spanning tree protocol (RSTP) is
based on the IEEE 802.1w standard spanning-tree protocol. The RSTP algorithm configures connectivity
throughout a bridged local area network (LAN) that is comprised of LANs interconnected by bridges.
bridge-priority
Set the bridge priority for RSTP.
Syntax
bridge-priority priority-value
To return to the default value, use the no bridge-priority command.
Parameters
priority-value Enter a number as the bridge priority value in increments of
4096. The range is from 0 to 61440. The default is 32768.
Defaults 32768
Command
Modes
CONFIGURATION RSTP (conf-rstp)
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
protocol spanning-tree rstp — enters rapid spanning tree mode.
debug spanning-tree rstp
Enable debugging of RSTP and view information on the protocol.
Syntax
debug spanning-tree rstp [all | bpdu interface {in | out} |
events]
To disable debugging, use the no debug spanning-tree rstp command.
Parameters
all (OPTIONAL) Enter the keyword all to debug all spanning
tree operations.
1142
Rapid Spanning Tree Protocol (RSTP)